Call Now Get Estimate
Call 24/7(814) 873-2788

Generator Installation & Repair in Erie, PA

Standby generators installed, serviced and repaired across Erie County — any brand, any make. Authorized Briggs & Stratton dealer, with annual maintenance plans and portable rentals available.

Licensed & Insured — PA #PA140374 Any Brand Serviced Free Estimates 100% Satisfaction Guarantee
★★★★★ 4.9 — 261 Google Reviews · Erie's Trusted Electricians

Get a Free Generator Estimate

Free, no-obligation estimates

Quick Answer

What size standby generator does my home need?

It depends on what you want running during an outage. Most whole-home standby generators fall roughly between 14 and 26 kW, sized up for central air, electric heat or a well pump. As an authorized Briggs & Stratton dealer, Shalkham Electric works out your home’s electrical load before recommending a size, so you don’t overpay or come up short.

Generator Installation & Service in Erie, PA

Erie County loses power. Lake-effect storms, ice and grid faults are part of living here — a standby generator is what keeps the heat on, the sump pump running and the freezer cold while the street stays dark.

Shalkham Electric & Construction Co. installs, services and repairs home and business standby generators throughout Erie, PA and the surrounding counties. We are an authorized Briggs & Stratton dealer for new installations, and we service and repair generators of any brand — including units we did not install.

A generator is only as good as the electrical work behind it. Sizing, the transfer switch, the fuel connection and the circuits it protects all have to be right, or the unit either will not carry the load or will not start when it is needed.

We handle the whole installation: load assessment, sizing, permitting, the pad, the electrical tie-in, the automatic transfer switch, and commissioning the unit so you know it works before you need it.

And once it is in, we keep it running. Annual maintenance plans cover the filters, oil and checks that keep a standby unit reliable — the part most owners forget until the power goes out and nothing happens.

Get a Free Generator Estimate
Whole-home standby generator installed outside a residence in Erie, PA

With us, you are sure to get:

  • Home standby generator installation
  • Commercial standby generator installation
  • Generator service and repair — any brand
  • Annual maintenance plans
  • Portable generator rentals
  • Portable generator hookups and inlet boxes
  • Automatic transfer switch installation
  • Generator sizing and load calculations
  • Natural gas and propane connections
  • Electrical panel evaluation and upgrades
  • Permitting, inspection and commissioning
Backup Power

What Goes Into a Standby Generator

Sizing, fuel, the transfer switch and the maintenance that keeps it working.

What Size Generator Do You Need?

Sizing is the decision that matters most. Too small and the unit cannot carry the load; too large and you have paid for capacity you never use.

Essential circuits — a 13kW unit covers the things you genuinely cannot do without: furnace, sump pump, refrigerator, some lighting and outlets.

Whole-home — a 22kW or 26kW unit runs the house more or less normally, including central air and electric appliances.

We perform a load calculation on your actual electrical system rather than guessing from square footage.

We Service and Repair Any Brand

Did someone else install your generator? That does not matter to us. We service and repair standby generators of any make — filter and oil changes, battery checks, fault diagnosis and repair.

If your unit failed to start during an outage, is throwing a fault code, or has not been serviced in years, we can get it running and keep it that way.

Annual Maintenance Plans — $299 Per Year

A standby generator sits unused for months and then has to start on demand in bad weather. That only happens reliably if it is maintained.

Our annual service plan covers the routine work — oil, filters, battery and a run test under load — for $299 per year.

Repairs are not included in the plan and are quoted separately. The plan is scheduled preventative maintenance; if the unit needs a part or a fault fixed, that is a separate job.

Natural Gas or Propane?

Residential standby generators run on natural gas or liquid propane. If you have a gas line, natural gas avoids refuelling and tank management. Without one, propane works and needs a correctly sized tank. Commercial installations can also use diesel.

The right choice depends on what fuel is already at the property and what supply is available.

The Automatic Transfer Switch

The transfer switch is what makes a standby generator automatic. It watches utility power, disconnects the house from the grid when it fails, starts the generator, and switches back when utility power returns.

It is also the safety-critical component: it prevents backfeed onto utility lines, which can kill line workers. This is not optional and it is not a DIY job.

Briggs & Stratton — Home and Commercial

As an authorized Briggs & Stratton dealer we install the PowerProtect range: PP13 (13kW), PP18 (18kW), PPDX22 (22kW) and PP26 (26kW) for homes, and liquid-cooled commercial units from 30kW to 200kW for businesses.

For the full range and specifications, see our home standby generator page or our commercial standby generator page.

Commercial Standby Power

For businesses, an outage is lost revenue, spoiled stock and closed doors. We install commercial standby systems sized to the facility — natural gas, propane or diesel — with the transfer gear to match.

Portable Generator Rentals

Not every situation calls for a permanent standby unit. For short-term needs — a job site, an event, or covering a property while a standby system is being installed — portable generator rental is available.

Call us to check availability and sizing for what you need to run.

Portable Generator Hookups

If you already own a portable generator — or would rather buy one than install a standby unit — we can wire the house to accept it safely. That means an exterior inlet box and a manual transfer switch, so you plug in one cord instead of running extension leads through a window.

It also means the generator powers real circuits: the furnace, the well pump, the sump pump, hard-wired equipment that has no plug. And because the transfer switch isolates the house from the grid, it prevents backfeed onto utility lines — which is why this has to be wired by a licensed electrician rather than improvised.

A hookup costs considerably less than a standby installation. It is the practical middle ground if you want real backup power without the price of an automatic system.

Generators and Solar Together

A standby generator and a home solar system solve different problems. Solar reduces what you buy from the grid day to day; a generator carries the house when the grid fails.

With battery storage the two work together. We install all three and can evaluate them as one project — see residential solar panel installation.

Does Your Panel Need Work First?

A generator ties into your electrical panel, and an older or full panel can complicate the installation. If an upgrade is needed we handle it as part of the project — see electrical panel upgrades.

Financing options are available through Hearth for qualified residential customers. Approval, rates, terms and availability vary.

Battery Storage as a Backup Power Option

A standby generator isn't the only way to keep the power on. Battery storage is a quieter alternative with no fuel to manage — it draws on stored energy rather than burning gas or propane, though runtime is limited by battery capacity rather than fuel supply. A generator can run indefinitely as long as it's fuelled; a battery is sized to carry specific loads for a set number of hours.

Shalkham installs battery storage on its own, connected to the electrical grid without a generator or solar, or alongside either — whatever fits how you want backup power to work. See battery storage details on our solar page, or call to talk through which option — generator, battery, or both — fits your property.

Our Generator Installation Process

From first conversation to a unit that starts when the grid does not.

1

Tell Us What You Need

A new installation, service on an existing unit, or a short-term rental.

2

Load Assessment

What you want to power, and what your electrical system can actually carry.

3

Sizing and Fuel

The right kW and the right fuel for your property and supply.

4

Transparent Quote

A clear, no-obligation estimate based on the actual job.

5

Permitting

Permits and inspections handled for you where required.

6

Installation

Pad, unit, fuel connection, transfer switch and electrical tie-in.

7

Commissioning

Tested under load, so you know it works before you need it.

8

Maintenance

Annual plans available to keep the unit reliable year after year.

What Our Generator Customers Say

★★★★★

“We live in Frontier and have been getting regular outages over the last several years, much more frequent lately. We went with Matthew for our generator and are so happy we did. From initial consult to installation was remarkably quick. The crew was friendly and professional, and they got most of the work done, incredibly, in a single day. That included a new electruc box outside. Can't recommend them enough!”

KP
King_Stannis Peterson
Google Review · July 2026
★★★★★

“These guys get the job done fast, and DONE RIGHT! 😎 I will not hesitate to use them again For my future needs and I’m definitely gonna share my experience with all my friends and family Thank you for the excellent service Johnathan & Ezra and the boss man Mr. M. Shalkham 💯”

AL
Alex Lozada
Google Review · May 2024
★★★★★

“Appreciate Matt’s prompt service. We have used them several times at sugar n spice for a few issues we have come across. We will continue to use their services!”

GT
Grant Troyer
Google Review · April 2024
HoursMon–Sun: Open 24 Hours

Generator Service Area

Shalkham Electric & Construction Co. installs and services standby generators from our base in Erie, Pennsylvania, serving homes and businesses across five counties in Pennsylvania, Ohio and New York.

Erie County, PA

  • Erie
  • Millcreek
  • Fairview
  • Harborcreek
  • Girard
  • Edinboro
  • Waterford
  • Corry
  • Union City
  • North East
  • McKean
  • Lawrence Park
  • Wesleyville
  • Albion
  • Lake City
  • Wattsburg
  • Summit Township
  • Greene Township

Crawford County, PA

  • Meadville
  • Titusville
  • Conneautville
  • Cambridge Springs
  • Guys Mills
  • Linesville
  • Cochranton
  • Blooming Valley
  • Conneaut Lake
  • Saegertown
  • Vernon Township
  • West Mead

Warren County, PA

  • Warren
  • Youngsville
  • Russell
  • Sugar Grove
  • Tidioute
  • Clarendon
  • Sheffield
  • Conewango
  • Pleasant Township

Ashtabula County, OH

  • Ashtabula
  • Conneaut
  • Geneva
  • Jefferson
  • Andover
  • Edgewood
  • North Kingsville
  • Orwell
  • Saybrook
  • Geneva-on-the-Lake

Chautauqua County, NY

  • Fredonia
  • Westfield
  • Mayville
  • Lakewood
  • Chautauqua
  • Bemus Point
  • Silver Creek
  • Hanover
Generator FAQs

Frequently Asked Questions

What homeowners and businesses in Erie County ask us about backup power.

Yes — we service and repair standby generators of any brand, including units installed by someone else. That covers filters, oil, battery checks, fault diagnosis and repair.
It depends whether you want essential circuits or the whole house. A 13kW unit covers essentials like the furnace, sump pump and refrigerator; 22kW or 26kW generally runs a home normally. We perform a load calculation on your actual system rather than estimating from floor area.
It depends on the size of the unit, the fuel, the distance from your electrical panel, the transfer switch and whether any electrical upgrades are needed. We provide free estimates based on the actual installation rather than a generic price.
Natural gas if you have a gas line, since it avoids refuelling and tank management. Propane otherwise, with a correctly sized tank. Diesel is available for commercial installations.
For an automatic standby system, yes. The transfer switch starts the generator when utility power fails and switches back when it returns. It also prevents dangerous backfeed onto utility lines, which is why it must be installed by a licensed electrician.
Annually as a rule. Our maintenance plan covers oil, filters, battery and a run test under load for $299 per year. Repairs are quoted separately and are not included in the plan.
A 22kW or 26kW unit generally will, including central air. A 13kW unit covers essential circuits. It depends on your actual electrical loads, which is what the load calculation determines.
Most residential installations are completed in a day or two once permits are in place. Commercial systems vary with the size and complexity of the installation.
We install Briggs & Stratton as an authorized dealer, covering the PowerProtect range for homes and liquid-cooled units from 30kW to 200kW for businesses. We service and repair any brand.
Yes — portable generator rental is available for short-term needs such as job sites, events, or covering a property while a standby system is being installed. Call us to check availability and sizing.
Yes. We install an exterior inlet box and a manual transfer switch so a portable generator can power real circuits — furnace, well pump, sump pump and hard-wired equipment — instead of running extension cords. The transfer switch also prevents backfeed onto utility lines, which is why it must be wired by a licensed electrician. A hookup costs considerably less than a standby installation.
Yes. Financing options are available through Hearth for qualified residential customers. Approval, rates, terms and availability vary.

Ready for Reliable Backup Power?

Whether you need a new standby generator installed or an existing one serviced, we cover it — any brand, start to finish.

Scroll to Top