Circuit Breaker Repair & Replacement in Erie, PA
Tripping, Hot or Failed Breakers, AFCI/GFCI Breakers, Federal Pacific, Zinsco & Pushmatic Replacement
A breaker that trips every night, won't reset, buzzes or feels warm to the touch is telling you something. Sometimes it's an overloaded circuit, sometimes a worn-out breaker, and sometimes it's a sign the whole panel has reached the end of its life.
Shalkham Electric & Construction Co. diagnoses breaker problems, replaces failed and outdated breakers, and replaces Federal Pacific, Zinsco and Pushmatic equipment throughout Erie and the surrounding counties.
Get a Free Estimate
Tell us what you need and we'll follow up to schedule.
Quick Answer
Why does my circuit breaker keep tripping?
A breaker that keeps tripping is usually reacting to an overloaded circuit, a short or ground fault, or it has worn out. Resetting it again and again can hide a real problem. If a breaker trips immediately, won't reset, feels warm or smells burnt, leave it off and have a licensed electrician find the cause.
Signs Your Breakers Need Attention
A circuit breaker has one job: shut off power before a wire overheats. When it trips, it is usually doing that job. When it trips constantly, refuses to reset or shows heat damage, it is time for a licensed electrician to look at the breaker, the circuit and the panel together. Call us if you notice:
- A breaker that trips repeatedly, even with little plugged in
- A breaker that won't stay on or snaps right back off when you reset it
- Breakers or the panel cover that feel warm or hot
- Buzzing, crackling or humming coming from the panel
- Scorch marks, melted plastic or a burning smell at the panel
- Lights that dim or flicker when a large appliance starts
- Rust or moisture inside the panel, common in damp basements
- A panel with no open spaces left for new circuits

Circuit Breaker Services
From one failed breaker to replacing an obsolete panel, we find the cause and leave the work code compliant.
Troubleshooting Tripping Breakers
We figure out why it trips: an overloaded circuit, a short, a ground fault, a failing appliance or a worn breaker. Then we fix the cause instead of just swapping parts.
Breaker Replacement
Worn, damaged, corroded or heat-damaged breakers replaced with the correct, listed breaker for your panel, sized to the wire it protects.
AFCI & GFCI Breakers
Arc-fault and ground-fault protection installed at the panel where current code calls for it, including combination AFCI/GFCI breakers for kitchens and laundry areas.
Tandem & Double-Tapped Breakers
Two wires under one breaker terminal, or tandem breakers in a panel not rated for them, are common inspection findings. We correct them the right way.
Obsolete Panel Replacement
Federal Pacific, Zinsco and Pushmatic panels and breakers replaced with modern equipment, with permits handled when required.

Diagnosis First
Why Breakers Trip, Won't Reset or Get Hot
Most nuisance tripping comes down to a few causes, and the right fix depends on which one you have.
- Overloaded circuit: too many devices on one circuit. Space heaters, microwaves, hair dryers and window air conditioners are the usual suspects, and the fix is often a dedicated circuit.
- Short circuit or ground fault: a damaged cord, a failing appliance, a loose connection or water getting into an outdoor box. These trip immediately and need to be found before the breaker goes back on.
- Worn-out breaker: breakers are mechanical devices. After years of trips, or exposure to heat and moisture, they can trip too easily, not trip at all, or fail to reset.
- Loose or overheated connections: a loose wire at the breaker or bus bar creates heat. That's often why a breaker feels warm or shows discoloration.
We test the circuit and the load, inspect the breaker and its connection to the panel, and explain what we found before recommending anything.
Older Erie Homes
Federal Pacific, Zinsco & Pushmatic Panels
Plenty of homes around Erie still have panels and breakers installed decades ago. Three brands in particular come up again and again on home inspections and insurance questionnaires:
- Federal Pacific (FPE) Stab-Lok: these panels have long-standing concerns about breakers that may not trip reliably under overload and about breakers that don't seat firmly on the bus. Home inspectors commonly flag them.
- Zinsco (and Sylvania-Zinsco): known for breakers that can overheat and fuse to the aluminum bus bar, which can keep a breaker from shutting off when it should.
- Pushmatic: durable in their day, but now very old, with push-button breakers that can stiffen over time and replacement parts that are hard to find. Many were also never designed for today's electrical loads.
Having one of these panels doesn't mean something is wrong today, but because replacement breakers are limited and the concerns are well known, replacing the panel is usually the practical fix rather than repairing it breaker by breaker. If a buyer, inspector or insurance company has flagged your panel, we can evaluate it and give you a free estimate on replacement.


Repair or Replace?
When a Panel Upgrade Is the Better Fix
Replacing a single breaker makes sense when the panel itself is in good shape. In other cases, putting new breakers in an old panel is money spent on the wrong problem. A full electrical panel upgrade is usually the better choice when:
- The panel is a Federal Pacific, Zinsco or Pushmatic, or replacement breakers are no longer available
- There's corrosion, burn damage or heat damage on the bus bar, not just the breaker
- Every space is full and the panel is crowded with tandem or double-tapped breakers
- You're adding major loads like an EV charger, heat pump, hot tub or electric range
- The home still has 60- or 100-amp service and you're running out of capacity
We'll give you a straight answer on whether a breaker replacement will do the job or whether the panel needs to go. Upgrades are eligible for residential financing through Hearth.
Breaker Problems We See in the Field



How We Handle Breaker Problems
Call or Request an Estimate
Tell us what the breaker is doing and when it happens.
Inspect & Test
We check the breaker, the circuit, the connections and the panel itself.
Clear Recommendation
Repair, replace or upgrade, with a free estimate before work starts.
Code-Compliant Work
Our licensed electricians install the correct, listed parts to current code.
Test & Label
Circuits are tested and labeled so you know what each breaker controls.
Why Erie Homeowners Call Shalkham
Breaker and panel work is not a place for guesswork. With Shalkham Electric & Construction Co. you get:
- Licensed Pennsylvania contractor (PA #PA140374), family-owned and established in 2018
- Work done to current code, with permits handled when the project requires them
- We diagnose the cause instead of just resetting or swapping breakers
- 24/7 emergency electrical service for hot, burning or failed panels
- Free estimates, insurance claims assistance and residential financing through Hearth
- Military and first responder discount
- Serving Erie, Crawford and Warren counties, Ashtabula County, OH and most of Chautauqua County, NY

What Our Customers Say
Real Google reviews from Shalkham Electric & Construction Co. customers.
“I would highly reccomend Shalkham Electric. The young man that came and changed a bad breaker was polite and efficient. In and out within 20 minutes.”
“I was in need of an electrician after our breakers kept tripping for a couple of days. I read all the google reviews and chose Shalkham. They were very responsive and professional, courteous and polite. While they were here, I spoke to them about my other electrical needs and they immediately hung a new light fixture without hesitation. They were good about explaining everything as they went along. I look forward to continue working with them for all my electrical needs.”
“I reached out to Matt last night through their website submission form and he got back to me in about an hour! It was already late at night around 9:30 pm (on Labor Day as well) and he said he’d be at our house in the morning at 9:00 am. Matt and his apprentice did a wonderful job and fixed my breaker box by lunch time. I was blown away by the fast response and professionalism. If you need electrical work I 100% recommend Matt and his team.”
“Matt and his team provided a competitive quote and were able to complete my pool electric job even when the schedule moved up 1.5 months and the forecast showed rain for the scheduled day. I'm very pleased with my decision to select Shalkham for this job.”
Circuit Breakers FAQs
Straight answers from Shalkham Electric & Construction Co.
Still have questions?
Call (814) 873-2788Breaker Tripping, Hot or Failing?
Shalkham Electric & Construction Co. finds the cause, replaces failed and outdated breakers and tells you honestly when a new panel makes more sense.
Our Electrical Services
Residential and commercial electrical work across Erie, Crawford and Warren counties, Ashtabula County, OH and Chautauqua County, NY.
Residential
Areas We Serve
Shalkham Electric & Construction Co. serves five counties across Pennsylvania, Ohio and New York.
Erie County, PA
- Erie
- Millcreek
- Fairview
- Harborcreek
- Girard
- Edinboro
- Waterford
- Corry
- Union City
- North East
- McKean
- Lawrence Park
- Wesleyville
- Albion
- Lake City
- Wattsburg
- Summit Township
- Greene Township
Crawford County, PA
- Meadville
- Titusville
- Conneautville
- Cambridge Springs
- Guys Mills
- Linesville
- Cochranton
- Blooming Valley
- Conneaut Lake
- Saegertown
- Vernon Township
- West Mead
Warren County, PA
- Warren
- Youngsville
- Russell
- Sugar Grove
- Tidioute
- Clarendon
- Sheffield
- Conewango
- Pleasant Township
Ashtabula County, OH
- Ashtabula
- Conneaut
- Geneva
- Jefferson
- Andover
- Edgewood
- North Kingsville
- Orwell
- Saybrook
- Geneva-on-the-Lake
Chautauqua County, NY
- Fredonia
- Westfield
- Mayville
- Lakewood
- Chautauqua
- Bemus Point
- Silver Creek
- Hanover